Your cart is empty

Hollowbody Electric Guitar Plans #4: Electronic Version

Hollowbody Electric Guitar Plans #4: Electronic Version
Move your mouse over image
  • Units in Stock: 100
  • Manufactured by: Georgia Luthier Supply

Starting at: $26.49

One of the most beautiful and elegant guitars is this classic hollowbody guitar. From its classic single cut-away body, to the great sounding deep body design, this is a must have guitar in your guitar collection.

We have gone through great pains to do justice to this fabulous guitar design and have created plans worthy of framing and placing on your wall - or better yet, building one of these one-of-a-kind guitars!

As soon as you complete your plan purchase with us, you will automatically be given a download link to access your plans. Learn why we sell our plans in an electronic version.

If you are looking for electric guitar plans that are similar to a specific make or model of electric guitar, please contact us and we'll point you in the right direction.

These electronic guitar plans are very detailed filled with details, sections, notation and dimensions to guide you on your way.

This guitar exhibits all the classic characteristics of this fabulous guitar. This version of this guitar features a body without a cutaway. We also have the single cutaway version plan of this guitar available. If you would prefer that, please click HERE.

Guitar Features
  • Scale: 24.5" (647.7mm)
  • Body Maximum Length = 21.22" (539mm)
  • Lower Bout Width = 16.91" (429.6mm)
  • Upper Bout Width =  12.66" (321.6mm)
  • Waist Width =  10.18" (258.6mm)
  • Body Thickness = 3.38" (86mm) (At Edge)  Plus Carved Top
  • Number of Frets = 20
  • Nut Width = 1.69" (42.9mm)
  • Fretboard Width at 20th Fret = 2.20" (56mm)
  • Fretboard Maximum Thickness = 1/4" (6.35mm)
  • Fretboard Radius = 12" (304.8mm)
  • Neck Reinforcement = 14-1/2" Dual Action Adjustable Truss Rod with Hex Nut. Adjustable at Headpiece
  • Neck Attachment: Standard Dovetail Joint - Glued
  • Peghead Type: Standard L-5 Type. 12.9 Degree Angle
  • Tuning Machines: Classic Kluson Waffleback 3+3 - Perloid Keystone BTN
  • Bridge: Classic Nashville Tune-O-Matic w/ Ebony Base
  • Tailpiece: Kluson Solid Brass Trapeze Tailpiece For Deep-Bodied Archtop Guitars w/ Deco Shaped Mounting Plate - Solid Brass. (Note: you may choose to use the standard L-5 Trapeze tailpiece if you can find one.)
  • Plastic Binding Around Top Perimeter w/Plastic Purfling. Binding Around Fretboard w/Purfling. Binding Around Peghead w/Purfling
  • Classic Flowerpot MOP or Abalone Headpiece Inlay
  • Body: Bent Maple Sides 3.2mm Thick
  • Carved Top: Sitka Spruce - Thickness Varies. Book-Matched Grain
  • Neck: 5-Ply Maple w/ Walnut Veneer Accent Stripes
  • Headpiece w/ Black-Stained Veneer Trim
  • Fretboard: Ebony or East Indian Rosewood

Guitar Electronics

Number of Pickups: 2 (Matched Set)
     Neck Pickup: Based on Seymour Duncan Humbucking #SH1
    Bridge Pickup: Based on Seymour Duncan Humbucking #SH1
Pickup Control: 3-Way Toggle Switch
    Left: Up Pickup On
    Center: Both Pickups On
    Down: Bridge Pickup On
Tone Controls: (1) Pot for Each Pickup
Volume Controls: (1) Pot for Each Pickup
Jack: Standard Side Mounted 1/4" Mono Phone Plug w/ Jack Plate

Add this guitar to your collection of handmade instruments with these easy to follow, well documented plans.

The Master Guitar Plan Includes 2 sheets of full sized drawings:
  • Guitar Plan Showing Top of Entire Guitar, Inc. Fretboard & Headpiece
  • Guitar Back View
  • Guitar Left Side View
  • Guitar Front View - Cut Through Neck Looking at Guitar Body
  • (2) Lateral Section Through Different Sections of the Body
  • Longitudinal Section Through Body, Neck & Peghead
  • Neck Sections @ 1st, 6th and 12th Frets
  • Horizontal Layout Through Body Looking at Top
  • Top and Back Plate Contour Layout in 1/16" (1.6mm) Increments, Showing Plate Carving Elevation Contours
  • (4) Plate Cross Sections
  • Top Plate Brace Diagrams and Templates
  • Enlarged Details of All Binding and Purfling Details of Body, Fretboard, Headpiece and Pickguard
  • Detailed Wiring Diagram
  • Fret Spacing Table

The Included Template Sheet provides you with the following template layouts: 
  • Form Insert Template Showing Both Halves of the Guitar for Form Insert Plans That Will Work With Our Guitar Heated Side Bender.
  • Neck Profile & Plan Incl. Headpiece & Tuner Layouts
  • Pickguard, Flower Pot Inlay, Truss Rod Plate and "F" Hole Routing Templates
Plans Are in Both Millimeters AND Inches/Fractional Inches:

All Guitar Building Plans are shown in both millimeter measurements and inches/fractional inches. Both are clearly shown in an over/under the dimension line style, so you can pick which measurement system you would like to use, or use both!

Need your guitar plans printed and delivered to your door? We offer this service to customers who don't have access to printing services, or just don't want to mess around with it. Check it out at our Digital Printing and Delivery Services. Just put your plans in the shopping cart and add what plans you want printed, or come back later, and we will do it that way for you too.

Would you like your plans printed and shipped overseas?

Please view our overseas plan printing page to learn how affordable our printing and overseas shipping can be!  

CNC Files:

We are now offering these hollowbody guitar plans in DWG and DXF file formats. For more information about this option, click HERE. Simply click the checkbox below and the files will be included immediately with your download. 

The last image in the mouse-over images at the top of this page will give you an accurate representation of the file content for these files.

**Georgia Luthier Supply is not affiliated with any guitar manufacturer, nor are our plans exact replicas of any guitar**

Please Choose:

Master Guitar Plans

CNC Files

Add to Cart:

This product was added to our catalog on Tuesday 10 September, 2013.