Your cart is empty

Dreadnought SS 3D CNC Files

Dreadnought SS 3D CNC Files
Move your mouse over image
  • Units in Stock: 500

Starting at:

These 3D Files are based off our popular Dreadnought SS PDF files and 2D CNC files that we have been offering recently. These 3D files will bring a whole new level of convenience to our customers that possess a CNC machine or have access to CNC routing services.

The Dreadnought SS files feature (6) different files that break the guitar down into convenient pieces and if you only wish to purchase a brace set or neck or any other portion listed here, you will be able to do that. Or, you can purchase the entire group of files for a reduced price.

The available files are detailed below:

Dreadnought SS Necks:

This file consists of (2) separate files.

1. The first file features our neck with a tenon attachment, which can be attached by direct gluing with dowels or with a bolt-on option. The mating neck block is offered below in the block set. The neck is smooth with graceful transitions from the neck to heel and neck to headpiece. The neck also features a channel for an adjustable truss rod.
2. The Second file features our neck with a traditional dovetail attachment joint, which can be attached by direct gluing to the head block. The mating neck block is offered below in the block set. The neck is smooth with graceful transitions from the neck to heel and neck to headpiece. The neck also features a channel for an adjustable truss rod.

Dreadnought SS Brace Set:

This file contains all the shaped braces for the top, complete with scalloping of the ends and center scallops for tone enhancement. The X brace cross joint is also accurately modeled for perfect mating of the X brace intersection for great structural integrity of the guitar top plate. Braces included are the X Braces, Tone Braces, Fillet Braces, Soundhole Braces, Fretboard brace, bridge plate and reinforcements adjacent to the fretboard.

Secondly, braces for the back plate have been included. These braces are rounded, with scalloped ends and accurately model the guitar back plate arch.

Finally, for those of you who like to use brace reinforcement for the sides rather than glue-impregnated tape, these file contains the set of scalloped side braces.

Dreadnought SS Fretboard:

This file also contains several files including:

1.  Fretboard with radius only.
2.  Fretboard with radius and fret tang slots. 
3. Dot Inlays for 6mm dis position dots.
4. Flower Inlay position markers.

Dreadnought SS Blocks:

The block file contains both the head block and the tail block files. Also this file contains both the head block for both the mortise and tenon neck and the dovetail neck.

Dreadnought SS Accessories:

This files contains all the miscellaneous files including:

1.  Belly Bridge, complete with ramps, tapered bridge pin holes and bridge pin countersinks
2.  Standard teardrop pickguard
3. Headpiece overlay

Dreadnought SS Complete:

This option will give you all the above files in one package for a reduced price.

Refer to our 3D CNC Faq Sheet for detailed information of these files.

Note that the photos on this page are actual rendered images from these files. Electronics, bridges, knobs, screws etc. are not included as part of these files.

Note: If you would like the top, back and side plate layouts, refer to our 2D CNC Dreadnought SS for that information, which is located on our Dreadnought SS Plan Page.




Please Choose:

3D CNC Files









Add to Cart:



This product was added to our catalog on Thursday 13 November, 2014.