Your cart is empty

Solid Body Electric Guitar Plan #16: Electronic Version

Solid Body Electric Guitar Plan #16: Electronic Version
Move your mouse over image
  • Units in Stock: 100
  • Manufactured by: Georgia Luthier Supply

Starting at: $17.49

This solid body guitar was first introduced in 1957 as a futuristic alternative to the other guitars available at the time. They were found to be too radical for the time and were discontinued by 1959. They were re-issued several times over the years and remain very popular today.

Unless otherwise specified, ALL plans are sold as electronic downloads. As soon as you complete your plan purchase with us, you will automatically be given a download link to access your plans. Learn why we sell our plans in an electronic version.

These electronic guitar plans are very detailed filled with details, sections, notation and dimensions to guide you on your way.

If you are looking for electric guitar plans that are similar to a specific make or model of electric guitar, please contact us and we'll point you in the right direction.


This guitar exhibits all the classic characteristics of this fabulous guitar.

Guitar Features
  • Scale: 24.75" (628.7mm)
  • Double Cutaway Body
  • Body Maximum Length = 20.94" (532mm)
  • Body Maximum Width = 16.83" (427.6mm)
  • Body Thickness = (44.5mm) 1 3/4"
  • Number of Frets = 22
  • Nut Width = 1.69" (42.9mm)
  • Fretboard Width at 22nd Fret = 2.22" (57.3mm)
  • Fretboard Maximum Thickness = 1/4" (6.35mm)
  • Fretboard Radius = 12" (304.8mm)
  • Neck Reinforcement = 18" Dual Action Adjustable Truss Rod with Hex Nut.
  • Adjustable at Headpiece
  • Neck Attachment: Mortise & Tenon Joint - Glued
  • Peghead Type: Standard Flying V Type. 12.9 Degree Angle
  • Tuning Machines: Classic Kluson Waffleback 3+3 - Perloid Keystone BTN
  • Bridge: Classic Nashville Tune-O-Matic
  • Tailpiece: Gotoh Stop Tailpiece w/ .990” (25.15mm) Bushings
  • Body: 1-3/4” (44.5mm) Honduras Mahogany Tapered Edges
  • Neck: Honduras Mahogany
  • Fretboard: Ebony or East Indian Rosewood

Guitar Electronics

Number of Pickups: 2 (Matched Set)
     Neck Pickup: Based on Seymour Duncan Humbucking #SH1
    Bridge Pickup: Based on Seymour Duncan Humbucking #SH1
Pickup Control: 3-Way Toggle Switch
    Left: Up Pickup On
    Center: Both Pickups On
    Down: Bridge Pickup On
Tone Controls: (1) Pot for Both Pickups
Volume Controls: (1) Pot for Each Pickup
Jack: Standard Top Mounted 1/4" Mono Phone Plug w/ Jack Plate


Add this guitar to your collection of handmade instruments with these easy to follow, well documented plans.

The Master Guitar Plan Includes 2 sheets of full sized drawings:
  • Guitar Plan Showing Top of Entire Guitar, Inc. Fretboard & Headpiece
  • Guitar Back View
  • Guitar Left Side View
  • Guitar Front View - Cut Through Neck Looking at Cutaway
  • Lateral Section Through Body
  • Longitudinal Section Through Body, Neck & Peghead
  • Neck Sections @ 1st, 6th and 12th Frets
  • Body Cavity Layout Showing all Routed Cavities for Pickups, Wiring, Controls Etc.
  • Detailed Wiring Diagram
  • Fret Spacing Table

The Included Template Sheet provides you with the following template layouts: 
  • Body + Cavity Routing Template for Body Shape, Pickup and Control Cavities, Wiring Channels
  • Neck Profile & Plan Incl. Headpiece & Tuner Layouts
  • Pickguard Routing Diagram,  Truss Rod Plate Routing Templates
  • Fretboard Routing Template, Incl. Fret Positions and Fretboard Radius Guide

Plans Are in Both Millimeters AND Inches/Fractional Inches:

All Guitar Building Plans are shown in both millimeter measurements and inches/fractional inches. Both are clearly shown in an over/under the dimension line style, so you can pick which measurement system you would like to use, or use both!
 

Need your guitar plans printed and delivered to your door? We offer this service to customers who don't have access to printing services, or just don't want to mess around with it. Check it out at our Digital Printing and Delivery Services. Just put your plans in the shopping cart and add what plans you want printed, or come back later, and we will do it that way for you too.

Would you like your plans printed and shipped overseas?

Please view our overseas plan printing page to learn how affordable our printing and overseas shipping can be! 

CNC Files:

We are now offering these electric guitar plans in DWG and DXF file formats. For more information about this option, click HERE. Simply click the checkbox below and the files will be included immediately with your download.

**Georgia Luthier Supply is not affiliated with any guitar manufacturer, nor are our plans exact replicas of any guitar**


The last image in the mouse-over images at the top of this page will give you an accurate representation of the file content for these files.

Please Choose:

Master Guitar Plans




CNC Files




Add to Cart:



Current Reviews: 1

This product was added to our catalog on Monday 02 September, 2013.